Short Description
ADJUSTMENT
1. VEHICLE PREPARATION FOR HEADLAMP AIM ADJUSTMENT
(a) Prepare the vehicle:
- Ensure that there is no damage or deformation to the body around the headlamps.
- Fill the fuel tank.
- Make sure that the oil is filled to the specified level.
- Make sure that the coolant is filled to the specified level.
- Inflate the tires to the appropriate pressure.
- Place the spare tire, tools, and jack in their original positions.
- Unload the trunk.
- Sit a person of average weight (68 kg, 150 lb) in the driver’s seat.
Website: www.tundrasolutions.com | Filesize: 52kb
No of Page(s): 5
Content
2. PREPARATION FOR HEADLAMP AIMING (Using a tester)
(a) Prepare the vehicle for headlamp aim check.
(b) Perform adjustment in accordance with the headlamp tester instructions.
3. PREPARATION FOR HEADLAMP AIMING (Using a screen)
(a) Prepare the vehicle according to the following conditions:
- Place the vehicle in a location that is dark enough to clearly observe the cutoff line. The cutoff line is a distinct line, below which light from the headlamps can be observed and above which it cannot.
- Place the vehicle at a 90 angle to the wall.
- Keep a 7.62 m (25 ft) distance between the center of the headlamp bulb and the wall.
- Place the vehicle on a level surface.
- Bounce the vehicle up and down to settle the suspension.
…
Get the file Download here