Short Description
09 Avalon
After changing the engine oil (U.S.A. only)
The oil change system should be reset. Perform the following procedures:
1. Switch the display to the odometer. (Page 142)
2. Turn the “ENGINE START STOP” switch or the engine switch OFF.
3. Vehicles with smart key system: While pressing the trip meter reset button, turn the “ENGINE START STOP’ switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays 000000.
Vehicles without smart key system: While pressing the trip meter reset button, turn the engine switch to the “ON” position. Continue to press and hold the button until the trip meter displays 000000.
Website: www.beavertontoyota.com | Filesize: 95kb
No of Page(s): 6
Content
‘09 Camry
Changing the engine oil (U.S.A. only)
To reset the oil change system, follow the procedure below:
1. Turn the “ENGINE START STOP” switch or engine switch OFF with the trip meter A reading shown. (Page 149)
2. While pressing the trip meter reset button (page 141), turn the “ENGINE START STOP’ switch or engine switch ON.
- Without multi-information display
3. Continue to press and hold the knob until the trip meter displays 000000.
- With multi-information display
3. Continue to press and hold the knob until “COMPLETE” appears on the multi-information display.
…
Get the file Download here