LUBRICATION OIL AND OIL FILTER REPLACEMENT (Toyota 2008 Highlander)

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhi1gPs5f4UBRxBt65LlAYUMK3i1btKWEnrfjR1JmJ8YqcqO7BadXY1KcS4WrTsqdBD6keUlxPpZh8V6Zgr3_OTY6H0TAJ0sC2RjyolCcRdX58ZKKTRavChAY2-UeE6gI91AEPFcQcTuHA/s400/2008_new_toyota_altis_2.jpg

Short Description

CAUTION:
- Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
- Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Protective clothing and gloves that cannot be penetrated by oil should be worn. The skin should be washed with soap and water, or waterless hand cleaner, to remove any used engine oil thoroughly. Do not use gasoline, thinners, or solvents.
- In order to preserve the environment, used oil and used oil filters must be disposed of at designated disposal sites.

Website: sumbiz03.home.comcast.net | Filesize: 129kb
No of Page(s): 5

Content
1. DRAIN ENGINE OIL
(a) Remove the oil filler cap.
(b) Remove the oil drain plug and gasket, and drain the oil into a container.
(c) Clean and install the oil drain plug with a new gasket.
Torque: 40 N·m (408 kgf·cm, 30 ft·lbf)
2. REMOVE OIL FILTER ELEMENT
(a) Remove the oil filter element service hole cover.
(b) Connect a hose with an inside diameter of 15 mm (0.59in.) to the pipe.
(c) Remove the oil filter drain plug from the oil filter cap.

Get the file Download here