Short Description
the BMW shop manual for proper torque specification. 8. Slide the furnished T-bolt clamp over the pipe and install the. pipe onto (overlap the two pipes) …
Website: www.twobros.com | Filesize: 85kb
Content
B M W R 1150RT
Catalytic Eliminator System
Parts List
We recommend that this performance exhaust system be
installed by a qualified motorcycle technician. If you have
any doubts as to your ability to install this exhaust system,
please consult with your local motorcycle dealer. Read all
instructions first before starting installation. Make sure the
motorcycle and exhaust system are completely cool before
starting the installation. Also, make sure the bike is secure
on the sidestand or ideally a rear service stand during
installation. Be sure to save all stock exhaust components
for possible use later.
1. Make sure the bike is completely cool before starting the
installation. Make sure the bike is secure on the sidestand or
ideally a rear service stand.
2. Remove the lower fairing and set aside.
3. Loosen the pinch bolt clamp where the muffler assembly
clamps to the stock head pipes (underneath, right side of the
bike).
4. Remove the 10mm cap screw where the muffler assembly
fastens to the left side rear foot peg bracket.
5. Carefully slide the muffler assembly rearward until it is free of
its mounts. Do not remove the muffler yet as the O2 sensor
is still attached….
Get the file Download here