Short Description
Thank you for selecting from Bed Lift Trans 4 Tough Stuff Products & Bridon Industries. For the easiest installation of the Bed Lift Kit, please follow the step by step sequence in this manual. Read and follow instructions / notations carefully in each step. Some covers and guards have been removed for illustrative / photographic purposes only in this manual.
Website: www.mulebedlift.com | Filesize: 1851kb
No of Page(s): 16
Content
…
Step 1
Identify these items supplied in the Bed Lift Kit:
1. Hydraulic pump with cylinder and bracket assembly. Note: Do Not disassemble lower bracket from
cylinder assembly.
2. Wiring harness, seat switch, toggle switch and decal.
3. Upper mounting bracket and fasteners.
…
Step 3
The installation steps # 4 thru 7 (installing lower bracket and cylinder assembly) and then steps # 10-15 (installing electrical cable) require working under the Mule in the center areas. A dealership may prefer to use an equipment hoist with open center access or front tire drive on ramps. We found raising the Mule approx 4 inches achieved comfortable working room for these noted steps. Pictured here is one option of a 4×4 wood block under each tire. However you choose to work on the under side of the Mule; the vehicle MUST be safely and fully supported on all four tires at all times.
…
Get the file Download here