Short Description
To prevent burns, work must be conducted only after the engine has properly cooled down. To ensure the bike does not fall over as you work on it, make sure it is stood on level ground. During the installation of the kit make sure that all parts are securely tightened to prevent from falling plate or loose master-cylinder. Pay special attention to the brake system, errors can cause serious injury. After installation, make sure that the parts of the kit are not touching other parts. Some parts are loosely tightened at the time of shipment. Please make sure all parts are securely tightened during the installation.
Website: tiforce.com | Filesize: 101kb
No of Page(s): 3
Content
Vibration can loosen the bolts while riding. Please regularly check all parts are securely tightened. Especially after any fall accident, please make a thorough check. This product is for standard motorbikes and those with our exhaust installed. There is possibility that this product cannot be installed when the motorbike has another non-standard exhaust, swing arm or frame, etc. Do not dismantle or alter our product. (It causes loss of function, and could cause fatal accidents.) Please note we cannot accept return of a kit when it has been illegally used or installed. If the motorbike has had a fall and its frame has been damaged, the installation of the kit may not be possible. In case of accident and damage to our product, please do not use. The broken parts may cause harm to the rider. The accident might cause the exhaust to fall off the motorbike and thus fatal accident or injury.
…
Get the file Download here