Short Description
Read this instruction manual carefully to learn the use of the vehicle and to teach your child safe and enjoyable driving. Please keep this manual for use as a reference in the future.
Website: common.csnstores.com | Filesize: 2407kb
No of Page(s): 16
Content
…
ASSEMBLY
1. Turn the article upside down so that you can work on the bottom of it. Remove the two
bushings from the axle.
2. Position the training wheels as shown in the figure.NOTE: Kick stand must be in “up” position when attaching training wheels.Training wheels are made specifically for each side, notice that training wheel for left side has area to allow for clearance of kickstand.
3. Fasten the training wheels with the supplied screws.
4. Put the front wheel on the axle, keeping the side with the plastic bearing on the inside.
5. Put a stud into the included push tool, and fasten the wheel in place, hammering it all the way down.
6. Slip the fender bushing onto the axle and push it all the way to the end (picture B).NOTE: The bearing is shaped so that it can only be put on the axle one way (see detail in picture A).
7. Slip the fender onto the axle and fasten it to the fender bushing, as shown in the detail. NOTE: Fender will only correctly fit onto bushing one way.
…
Get the file Download here