Towing and Road Service Guide For Lexus LS 460

Short Description
The Lexus LS 460 has a standard ground clearance of 5.7 inches with the optional air suspension system functioning properly. Loading this vehicle onto a conventional car carrier may require additional ramping in some circumstances. However, clearance at the trailing end of the vehicle should always be monitored as it is loaded. The towing eye bolt should be used for front loading of this LS series vehicle. The eye bolt is located in the tool kit in the center of the rear cargo area under the floor.

Website: partner.aaa.biz | Filesize: 548kb
No of Page(s): 20

Content
If the towing eyebolt is missing or otherwise inaccessible, the tie-down slots on the undercarriage can be used to load the vehicle. Eyebolts are available for purchase through any Lexus dealership parts department. Other towing and tie-down equipment shown in this guide is available through AW Direct, a AAA preferred supplier.
To install the eyelet correctly on this vehicle, start by carefully removing the eyelet receiver cap from the bumper. If a sharp, metal object like a screwdriver is used as shown below, use a cloth or piece of paper to protect the painted surfaces from scratches.
Although the receiver cap cover has a string type piece that holds it to the vehicle when it is removed, it is always a good idea to remove the assembly completely from the bumper. Stow the receiver cap in the vehicle either in the trunk, where the eyelet was stowed, or in a cup holder in the center console, so that it does not blow off the vehicle or get lost during transport.
SHIFTER LOCK OVERRIDE
If there is a problem with the shifter or if the ignition key is not available, the transmission can be shifted out of the park position. This is accomplished by lifting out the small cover above the shifter “Park (P)” indicator and depressing the button below the cover to allow the shifter to be moved out of the Park position.
…

Get the file Download here