Short Description
The descriptions and service procedures contained in this manual are based on designs and methods studies carried out up to January 2005. The products are under continuous development. Vehicles and components produced after the above date may therefore have different specifications and repair methods. When this is judged to have a significant bearing on this manual, supplementary service bulletins will be issued to cover the changes. The new edition of this manual will update the changes. In service procedures where the title incorporates an operation number, this is a reference to V.S.T. (Volvo Standard Times). Service procedures which do not include an operation number in the title are for general information and no reference is made to V.S.T.
Website: www.volvo.com | Filesize: 3908kb
No of Page(s): 32
Content
…
Volvo’s three core values are quality, safety and respect for the environment. This manual has been prepared as one element of this respect for the environment, to provide general guidelines and information for the dismantling of a Volvo truck. The aim is to give comprehensive information on how dismantling should take place, whilst leaving a certain amount of flexibility to permit a workshop to devise its own methods and procedures for the work of dismantling, and also to ensure that harmful waste and other material that could cause harm to people or the environment is handled in an environmentally correct manner.
Correct handling also reduces costs and makes best use of the economic value of components and material. This information is of a general nature because this manual is applicable to different types of truck, which means that certain details may vary between different truck models. However the important information still applies. For more detailed information and working instructions refer to the other service information in the respective groups from 1 to 9.
…
Switch the main power switch off and disconnect the batteries.
Ensure that the ignition has been switched off for at least two minutes before removing the electrical supply, so that the SCR system has time to empty out the urea solution and release its pressure.
…
Dismantling the SRS system.
Carefully follow the dismantling instructions in service information Group 8. Control unit (1), air bag module (2), slip ring (3) and belt tensioner (4).
…
Get the file Download here