Short Description
NOTE:
• Inflate the tires to the specified air pressure.
• These instructions show the left damper assembly being installed; the same procedure applies to installing the right damper assembly.
• These dampers are designed to be used exclusively with this model and should not be used with other models.
• The dampers for the left and right sides are different. Be sure to note the “L” and “R” markings on the dampers for the proper installation.
Website: techinfo.honda.com | Filesize: 520kb
No of Page(s): 8
Content
Removing the Front Damper
1. With the vehicle on a rack, remove all four wheels.
2. Remove the cotter pin from the tie-rod end ball joint, and remove the nut.
3. Using ball joint remover tool, disconnect the tierod end from the steering arm of the damper assembly.
4. Remove the wheel sensor harness bracket, and the brake hose bracket from the damper. Do not unplug the wheel speed sensor connector.
…
Get the file Download here