Short Description
CONGRATULATIONS! You have just purchased the finest engine management system available. EFI control is an exact science that ACCEL has made simple. This manual is written to assist you with the installation of your new system to your FORD application. Please read this manual carefully.
Website: www.mr-gasket.com | Filesize: 771kb
No of Page(s): 26
Content
…
Prior to installing your manifold make sure that all gasket surfaces are clean. ACCEL recommends using a 180 degree thermostat in most applications. Place your thermostat and gasket onto your manifold, put your thermostat housing onto the manifold and bolt in place. When installing your fuel injectors, be careful not to cut the O-Rings. A small amount of oil on each O-Ring will aid in the assembly. Please reference a service manual for proper torque sequence and vacuum line routing. If this is a custom manifold, please contact your fabricator for this information.
…
The ECM comes with three (3) mounting tabs designed for a #8 sheet metal screw. It is recommended that you mount the ECM in the passenger side kick panel. If the kick panel has an air vent incorporated into it, DO NOT mount the ECM here. This unit is not waterproof and therefore needs to be mounted in a location free of moisture. The alternate locations are in the dash board and behind the glove box. NEVER MOUNT THE ECM IN THE ENGINE COMPARTMENT!
…
Get the file Download here