Short Description
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the “Accessory Installation Practices” document. This document covers such items as:-
• Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).
• Safety (eye protection, rechecking torque procedure, etc.).
• Vehicle Disassembly/Reassembly (panel removal, part storage, etc.).
• Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.).
Website: www.sewellpartsonline.com | Filesize: 533kb
No of Page(s): 15
Content
…
1. Vehicle Protection
(a) Set emergency hand brake.
(b) Remove the negative battery cable (Fig. 1-1).
(1) Protect the fender before starting.
(2) Do not touch the positive terminal with any tool when removing cable.
(c) Wait 90 seconds before proceeding to disassemble vehicle.
2. Disassembly of Vehicle
NOTE: Place all removed parts on a protected surface.
NOTE: When disconnecting wiring connectors do not pull on the wiring, pull on the connector only.
(a) Remove the trunk floorboard (Fig. 2-1).
(b) Remove the tool tray (Fig. 2-1).
Get the file Download here