LAND ROVER V8 Service Repair Manual

Short Description
CRANKSHAFT PULLEY AND FRONT COVER OIL SEAL - up to 99MY
1. Disconnect battery negative lead.
2. Remove cooling fan. See COOLING SYSTEM, Repair.
3. Slacken 3 water pump pulley securing bolts.
4. Remove alternator drive belt.
5. Remove water pump pulley bolts. Remove pulley.
6. Raise vehicle on four post lift.Remove acoustic cover if applicable. See CHASSIS AND BODY, Repair.
7. Secure LRT-12-080 to crankshaft pulley with 4 bolts.

Website: www.landrover.ee | Filesize: 1402kb
No of Page(s): 56

Content
…
CRANKSHAFT REAR OIL SEAL
Remove
1. Manual Vehicles: Remove flywheel. See this section.
2. Automatic Vehicles: Remove drive plate. See this section.
3. Remove oil seal from location.
4. Ensure both seal location and running surface on crankshaft are clean.
5. Ensure mating faces of flywheel and crankshaft are clean.
6. Lubricate seal guide LRT-12-095 with clean engine oil. Position over crankshaft boss.
…

Get the file Download here