Short Description
Note:
All cable ties opened or cut during engine removal must be reinstalled at the same
locations.
Remove engine without transmission toward the front.
Drained coolant must be stored in a clean container for disposal or reuse.
Always replace seals and gaskets.
Do not open coolant circulation system.
Website: www.socals4.com | Filesize: 1035kb
No of Page(s): 22
Content
Removing
- First determine whether a coded radio is installed. If so, determine the correct coding.
- Switch ignition off and disconnect battery Ground (GND) strap.
- Remove bolts (arrows) and remove engine covers -A- and -B-.
- Remove cover above air filter.
- Remove plenum cover.
- Remove sound-proofing material (arrows).
- Remove bracket for sound-proofing at unit support.
- Drain engine coolant => page 19-19
- Remove front bumper:
- => Repair Manual, Body Exterior, Repair Group 63
- Remove lock carrier:
=> Repair Manual, Body Exterior, Repair Group 50
- Remove viscous fan counter-hold using 3212 spanner wrench.
…
Get the file Download here